Nokia 7330 - Clear Commands; Alarm; Table 31 Alarm Command

System Management
38
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
3.5.4 Clear Commands
3.5.4.1 alarm
Table 31 alarm command
Item Description
Syntax alarm isis-adjacency-reject router-id router-id adjacency-idx adjacency-idx
alarm isis-adjacency-down router-id router-id adjacency-idx adjacency-idx
alarm ospf-neighbor-down router-id router-id neighbor-idx neighbor-idx
alarm l2fw-stp-root-guard {port port-id | lag lag-id} service-id service-id
alarm ihub-out-of-mem slot nt-slot
alarm gen-switch-out-of-res
alarm ldp-session-down
alarm pim-neighbour-down
alarm ldp-session-down router-id router-id ip-address ip-address
alarm pim-neighbor-down
alarm ipv6-dad-own router-id router-id duplicate-idx duplicate-idx
alarm ipv6-dad router-id router-id duplicate-idx duplicate-idx
Context clear
Description This command allows to clear the specified alarm.
(1 of 2)