Monitor Commands
80
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
----------------------------------------------------------------------------
At time t = 5 sec (Mode: Absolute)
----------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
----------------------------------------------------------------------------
At time t = 10 sec (Mode: Absolute)
----------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
----------------------------------------------------------------------------
At time t = 15 sec (Mode: Absolute)
----------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
============================================================================
A:ALA-1>monitor#
A:ALA-1>monitor# filter ip 10 entry 1 interval 5 repeat 3 rate
===========================================================================
Monitor statistics for IP filter 10 entry 1
===========================================================================
At time t = 0 sec (Base Statistics)
---------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
---------------------------------------------------------------------------
At time t = 5 sec (Mode: Rate)
---------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
---------------------------------------------------------------------------
At time t = 10 sec (Mode: Rate)
---------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
---------------------------------------------------------------------------
At time t = 15 sec (Mode: Rate)
---------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
===========================================================================
A:ALA-1>monitor#
5.3.1.3 ipv6
Table 92 ipv6 command
Item Description
Syntax ipv6 ipv6-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>filter
(1 of 2)