Nokia 7330 - Tx-Credit-Max; Tx-Hold-Multiplier

Link Layer Discovery Protocol
216
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
9.3.1.6 tx-credit-max
Table 246 tx-credit-max command
9.3.1.7 tx-hold-multiplier
Table 247 tx-hold-multiplier command
Description This command enables/disables LLDP on a system wide level.
Default no shutdown
Item Description
(2 of 2)
Item Description
Syntax tx-credit-max count
no tx-credit-max
Context configure>system>lldp
Description This command configures the maximum number of consecutive LLDPDUs transmitted.
The no form of the command returns the value to the default value.
Default 5
Parameters count — Specifies the maximum number of consecutive LLDPDUs transmitted.
Values: 1..100
Item Description
Syntax tx-hold-multiplier multiplier
no tx-hold-multiplier
Context configure>system>lldp
Description This command configures the multiplier of the tx interval.
The no form of the command returns the value to the default value.
Default 4
Parameters multiplier — Specifies the multiplier of the tx interval.
Values: 2..10