Nokia 7330 - 2 Introduction; Contents; 2.2 CLI Command Syntax Symbols; Table 1 Chapter Names and Descriptions

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Introduction
Issue: 10 3HH-11982-AAAA-TQZZA 21
2 Introduction
2.1 Contents
2.2 CLI Command Syntax Symbols
2.1 Contents
Table 1 lists the different chapters in this manual with a short description.
Table 1 Chapter names and descriptions
2.2 CLI Command Syntax Symbols
This section explains the symbols used throughout this manual within a CLI
command syntax, see Table 2.
Chapter Description
System Management This chapter provides information about configuring basic system management
parameters.
Security This chapter provides information about security features.
Monitor Commands This chapter provides information on monitor commands.
Events and Logs This chapter provides information about configuring event logs
Tools This chapter provides information on tools.
Ethernet Connection Fault
Management
This chapter provides information about Ethernet Connection Fault Management
Link Layer Discovery
Protocol
This chapter provides information on Link Layer Discovery Protocol