Nokia 7330 - Lsp-Sync-Exit; Mpls; Run-Manual-Spf; Table 190 Lsp-Sync-Exit Command

Tools
160
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
7.2.3.9 lsp-sync-exit
Table 190 lsp-sync-exit command
7.2.3.10 run-manual-spf
Table 191 run-manual-spf command
7.2.3.11 mpls
Table 192 mpls command
Item Description
Syntax [no] ldp-sync-exit
Context tools>perform>router>isis
tools>perform>router>ospf
Description This command restores the actual cost of an interface at any time. When this command is
executed, IGP immediately advertises the actual value of the link cost for all interfaces which
have the IGPLDP synchronization enabled if the currently advertised cost is different.
Item Description
Syntax run-manual-spf
Context tools>perform>router>isis
Description This command runs the Shortest Path First (SPF) algorithm.
Item Description
Syntax mpls
Context tools>perform>router
Description This command enables the context to perform specific MPLS tasks.