Nokia 7330 - Icmp-Code; Icmp-Type; Router; Table 63 Icmp-Code Command

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Security
Issue: 10 3HH-11982-AAAA-TQZZA 65
4.4.2.27 icmp-code
Table 63 icmp-code command
4.4.2.28 icmp-type
Table 64 icmp-type command
4.4.2.29 router
Table 65 router command
Item Description
Syntax [no] icmp-code icmp-code
Context configure>system>security>cpu-filter>ipv6-filter>entry>match
Description Configures matching on ICMP code field in the ICMP header of an IPv6 packet as a filter match
criterion.
This option is only meaningful if the protocol match criteria specifies ICMP (1).
The no form of the command removes the criterion from the match entry.
Default no icmp-code
Parameters icmp-code — The ICMP code values that must be present to match.
Item Description
Syntax [no] icmp-type icmp-type
Context configure>system>security>cpu-filter>ipv6-filter>entry>match
Description This command configures matching on the ICMP type field in the ICMP header of an IPv6
packet as a filter match criterion.
This option is only meaningful if the protocol match criteria specifies ICMP (1).
The no form of the command removes the criterion from the match entry.
Default no icmp-type
Parameters icmp-type — The ICMP type values that must be present to match.
Item Description
Syntax [no] router router-name
Context configure>system>security>cpu-filter>ipv6-filter>entry>match
Description This command specifies a base router to be used in the match criteria.
(1 of 2)