Nokia 7330 - Force-Switchover; Table 203 Force-Switchover Command

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Tools
Issue: 10 3HH-11982-AAAA-TQZZA 165
7.2.3.22 force-switchover
Table 203 force-switchover command
Item Description
Syntax force-switchover sdp-id:vc-id
no force-switchover
Context tools>perform>service>id>endpoint
Description This command forces a switch of the active spoke SDP for the specified service.
Parameters sdp-id:vc-id — Specify an existing spoke SDP for the service.