Nokia 7330 - Mac-Address; Priority; Table 216 Mac-Address Command; Table 217 Type Command

Ethernet Connection Fault Management
188
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
8.12.1.11 mac-address
Table 216 mac-address command
8.12.1.12 type
Table 217 type command
8.12.1.13 priority
Table 218 priority command
Item Description
Syntax mac-address mac-address
Context configure>eth-cfm>y1731pm>domain
Description Specifies the target unicast MAC address for the y1731pm session.
The no form of the command reverts the value to the default.
Default 00:00:00:00:00:00
Parameters mac-address — [xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx]
Item Description
Syntax type type
Context configure>eth-cfm>y1731pm>domain
Description The value of type indicates the type of y1731pm session this row details.
The no form of the command reverts the value to the default.
Default None
Parameters type — <none|two-way-delay|two-way-slm|single-end-loss >
Item Description
Syntax priority type
Context configure>eth-cfm>y1731pm>domain
Description The value of Priority specifies the priority used in the generated test frame for the Y1731 PM
(LM/DM/SLM) session.
This parameter can be set only when admin status is set to disabled.
The no form of the command reverts the value to the default.
(1 of 2)