Nokia 7330 - Filter-ID; Table 127 Event Control Output Fields; Table 128 Filter-ID Command

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Events and Logs
Issue: 10 3HH-11982-AAAA-TQZZA 133
Table 127 describes the command output fields.
Table 127 Event Control Output Fields
6.8.7.2 filter-id
Table 128 filter-id command
Parameters application-id — Only displays event control for the specified application
Default: All applications
Values: A valid application name. Valid applications are: bgp, debug, dhcp, filter,
igmp_snooping, ip, isis, lag, ldp, logger, mirror, mpls, ospf, port, rip, route_policy, security,
snmp, stp, svcmgr, system, user, vrtr
event-name — Only displays event control for the named application event.
Default: All events for the application.
event-number — Only displays event control for the specified application event number.
Default: All events for the application.
Label Description
Application The application name.
ID# The event ID number within the application.
L ID# — An “L” in front of an ID represents event types that do not generate an
associated SNMP notification. Most events do generate a notification, only the
exceptions are marked with a preceding “L”.
Event Name The event name.
P CL — The event has a cleared severity/priority.
CR — The event has critical severity/priority.
IN — The event has indeterminate severity/priority.
MA — The event has major severity/priority.
MI — The event has minor severity/priority.
WA — The event has warning severity/priority.
g/s gen — The event will be generated/logged by event control.
Logged The number of events logged/generated.
Item Description
(2 of 2)
Item Description
Syntax filter-id filter-id
Context show>log
Description Displays event log filter policy information.
(1 of 2)