Nokia 7330 - Dst-Ip; Dst-Port; Table 44 Dst-Ip Command; Table 45 Dst-Port Command

Security
56
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
4.4.2.8 dst-ip
Table 44 dst-ip command
4.4.2.9 dst-port
Table 45 dst-port command
Parameters dscp-name — Configures a DCSP name that represents a DiffServ code point. The mapping
between a DCSP name and a DiffServ code point is fixed.
Values: be, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cs1, cp9, af11, cp11, af12, cp13,
af13, cp15, cs2, cp17, af21, cp19, af22, cp21, af23, cp23, cs3, cp25, af31,
cp27, af32, cp29, af33, cp31, cs4, cp33, af41, cp35, af42,cp37, af43,
cp39, cs5, cp41, cp42, cp43, cp44, cp45, ef, cp47, nc1, cp49, cp50, cp51,
cp52,cp53, cp54, cp55, nc2, cp57, cp58, cp59, cp60, cp61, cp62, cp63
Item Description
(2 of 2)
Item Description
Syntax [no] dst-ip {ip-address[/mask]} [ip-address netmask]
Context configure>system>security>cpu-filter>ip-filter>entry>match
Description This command configures a destination IP address range to be used as an IP filter match
criterion.
To match on the destination IP address, specify the address and its associated mask, e.g.
10.1.0.0/16. The conventional notation of 10.1.0.0 255.255.0.0 may also be used.
The no form of the command removes the destination IP address match criterion.
Default None
Parameters ip-address — The IP address for the IP match criterion in dotted decimal notation.
Values: 0.0.0.0 — 255.255.255.255
mask — The subnet mask length expressed as a decimal integer.
Values: 1— 32
netmask — Any mask expressed in dotted quad notation.
Values: 0.0.0.0 — 255.255.255.255
Item Description
Syntax [no] dst-port [tcp/udp port-number] [mask]
Context configure>system>security>cpu-filter>ip-filter>entry>match
(1 of 2)