Nokia 7330 - Interface; Table 101 Interface Command

Monitor Commands
96
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
At time t = 0 sec (Base Statistics)
----------------------------------------------------------------------------
Addr FECs Sent : 0 Addr FECs Recv : 0
Serv FECs Sent : 1 Serv FECs Recv : 2
----------------------------------------------------------------------------
At time t = 5 sec (Mode: Rate)
----------------------------------------------------------------------------
Addr FECs Sent : 0 Addr FECs Recv : 0
Serv FECs Sent : 0 Serv FECs Recv : 0
----------------------------------------------------------------------------
At time t = 10 sec (Mode: Rate)
----------------------------------------------------------------------------
Addr FECs Sent : 0 Addr FECs Recv : 0
Serv FECs Sent : 0 Serv FECs Recv : 0
----------------------------------------------------------------------------
At time t = 15 sec (Mode: Rate)
----------------------------------------------------------------------------
Addr FECs Sent : 0 Addr FECs Recv : 0
Serv FECs Sent : 0 Serv FECs Recv : 0
============================================================================
A:ALA-12>monitor>router>ldp#
5.3.4.6 interface
Table 101 interface command
Item Description
Syntax interface interface [interface...(up to 5 max)] [interval seconds] [repeat repeat] [absolute |
rate]
Context monitor>router>ospf
Description This command displays statistics for OSPF interfaces at the configured interval until the
configured count is reached.
The first screen displays the current statistics related to the OSPF interface(s). The
subsequent statistical information listed for each interval is displayed as a delta to the previous
display.
When the rate keyword is specified, the “rate per second” for each statistic is displayed instead
of the delta.
Monitor commands are similar to show commands but only statistical information displays.
Monitor commands display the selected statistics according to the configured number of times
at the interval specified.
(1 of 2)