Nokia 7330 - Entry; Action; Match; Table 57 Entry Command

Security
62
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
4.4.2.21 entry
Table 57 entry command
4.4.2.22 action
Table 58 action command
4.4.2.23 match
Table 59 match command
Item Description
Syntax [no] entry entry-id [create]
Context configure>system>security>cpu-filter>ipv6-filter
Description This command creates a configuration context for a CPU filter entry.
CPU filter entries specify either a forward or a drop action for packets based on specified
match criteria.
Any changes made to the existing policy, using any of the sub-commands, will be applied
immediately to all services where this policy is applied.
The no form of the command deletes the CPU filter entry.
Parameters entry-id — Specifies the CPU filter policy ID number.
Values: 1 — 1536
create — Keyword when first creating the configuration context. Once the context is created,
one can navigate into the context without the create keyword.
Item Description
Syntax [no] action {accept | drop}
Context configure>system>security>cpu-filter>ipv6-filter>entry
Description This command configures action accept or drop for a CPU filter entry.
Default Drop.
Parameters accept — Specifies packets matching the entry criteria will be accepted.
drop — Specifies packets matching the entry criteria will be dropped.
Item Description
Syntax [no] match [next-header next-header]
(1 of 2)