Nokia 7330 - System Information Commands; System Administration Commands; Show Commands; Clear Commands

System Management
28
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
3.4.1 System Information Commands
configure
— system
— lacp-priority lacp-priority
— no lacp-priority
— time
— ntp
— polling-rate polling-rate
— server ip-address [server-port udp port]
— no server ip-address
—[no] shutdown
—[no] user-user-hairpin
— vlan-dot1q-etype etype
— no vlan-dot1q-etype
3.4.2 System Administration Commands
admin
— display-config
—[no] enable-tech
— save
3.4.3 Show Commands
show
— system
— core1-cpu [sample-period seconds]
— core1-memory-pools
— ntp [detail]
— servers servers [detail]
— server servers server-address [detail]
— user-user-hairpin
— vlan-dot1q-etype
— core1-uptime
— ipv6-prefix-mgmt
— dst-ip
— src-ip
3.4.4 Clear Commands
clear
— alarm isis-adjacency-reject router-id router-id adjacency-idx adjacency-idx
— alarm isis-adjacency-down router-id router-id adjacency-idx adjacency-idx
— alarm ospf-neighbor-down router-id router-id neighbor-idx neighbor-idx
— alarm l2fw-stp-root-guard {port port-id | lag lag-id} service-id service-id
— alarm ihub-out-of-mem slot nt-slot
— alarm gen-switch-out-of-res
— alarm ldp-session-down router-id router-id ip-address ip-address
— alarm pim-neighbor-down
— alarm ipv6-dad-own router-id router-id duplicate-idx duplicate-idx
— alarm ipv6-dad router-id router-id duplicate-idx duplicate-idx