"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Security
Issue: 10 3HH-11982-AAAA-TQZZA 73
4.4.3.9 end-time
Table 81 end-time command
4.4.3.10 tolerance
Table 82 tolerance command
Parameters date hours-minutes — Specifies the date and time for the key to become active.
Values: date: YYYY/MM/DD
hours-minutes: hh:mm[:ss]
UTC — Indicates that time is given with reference to Coordinated Universal Time in the input.
now — Specifies the key should become active immediately.
forever — Specifies that the key should always be active.
Item Description
(2 of 2)
Item Description
Syntax end-time [date] [hours-minutes] [UTC] [now] [forever]
no end-time
Context configure>system>security>keychain>direction>uni>receive>entry
Description This command specifies the calendar date and time after which the key specified by the
authentication key is no longer eligible to sign and/or authenticate the protocol stream.
The no form of this command returns the end time to its default value.
Default forever
Parameters date — Specifies the calendar date after which the key specified by the authentication key is
no longer eligible to sign and/or authenticate the protocol stream in the YYYY/MM/DD format.
When no year is specified the system assumes the current year.
hours-minutes — Specifies the time after which the key specified by the authentication key is
no longer eligible to sign and/or authenticate the protocol stream in the hh:mm[:ss] format.
Seconds are optional, and if not included, assumed to be 0.
UTC — Indicates that time is given with reference to Coordinated Universal Time in the input.
now — Specifies a time equal to the current system time.
forever — Specifies a time beyond the current epoch.
Item Description
Syntax tolerance [seconds | forever]
(1 of 2)