Nokia 7330 - Message- Fast-Tx-Init; Reinit-Delay; Shutdown

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Link Layer Discovery Protocol
Issue: 10 3HH-11982-AAAA-TQZZA 215
9.3.1.3 message- fast-tx-init
Table 243 message-fast-tx-init command
9.3.1.4 reinit-delay
Table 244 reinit-delay command
9.3.1.5 shutdown
Table 245 shutdown command
Item Description
Syntax message-fast-tx-init count
no message-fast-tx-init
Context configure>system>lldp
Description This command configures the number of LLDPDUs to send during the fast transmission period.
The no form of the command returns the number to the default number.
Default 4
Parameters count — Specifies the number of LLDPDUs to send during the fast transmission period.
Values: 1..8
Item Description
Syntax reinit-delay time
no reinit-delay
Context configure>system>lldp
Description This command configures the time (in seconds) before re-initializing LLDP on a port.
The no form of the command returns the time to the default time.
Default 2
Parameters time — Specifies the time, in seconds, before re-initializing LLDP on a port.
Values: 1..10
Item Description
Syntax shutdown
no shutdown
Context configure>system>lldp
(1 of 2)