Nokia 7330 - CCM-Interval; Mhf-Creation; Table 209 Mhf-Creation Command; Table 210 CCM-Interval Command

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Ethernet Connection Fault Management
Issue: 10 3HH-11982-AAAA-TQZZA 185
8.12.1.4 mhf-creation
MIP Half-Function (MHF): MHFs generate CFM PDUs only as a response to
received CFM PDUs.
Table 209 mhf-creation command
8.12.1.5 ccm-interval
Table 210 ccm-interval command
Item Description
Syntax mhf-creation {default | none | explicit}
no mhf-creation
Context configure>eth-cfm>domain>association>bridge-identifier
Description This command creates a MHF inside a service.
Parameters default | none | explicit — Keywords. They define the manner in which the MHF is created.
• Default - Only MIP is created in the SAP/SDP of the service associated as bridge-identifier
• Explicit - Enables the automatic creation of the MIP when a MEP is created in the same
service instance
Item Description
Syntax ccm-interval interval
no ccm-interval
Context configure>eth-cfm>domain>association
Description This command configures the CCM transmission interval for all MEPs in the association.
The no form of the command reverts the value to the default.
Default 10 seconds
Parameters interval — Specifies the interval between CCM transmissions to be used by all MEPs in the
MA.
Values: 1 second, 10 seconds, 60 seconds, and 600 seconds