Nokia 7330 - Shutdown; Address-Type; Table 34 Shutdown Command; Table 35 Address-Type Command

Security
50
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
3HH-11982-AAAA-TQZZA Issue: 10
4.4.1.2 shutdown
Table 34 shutdown command
4.4.1.3 address-type
Table 35 address-type command
Default No description associated with the configuration context.
Parameters string — The description character string. Allowed values are any string up to 80 characters
long composed of printable, 7-bit ASCII characters. If the string contains special characters (#,
$, spaces, etc.), the entire string must be enclosed within double quotes.
Item Description
(2 of 2)
Item Description
Syntax [no] shutdown
Context configure>sys>security>keychain>direction>bi>entry
configure>system>security>keychain>direction>uni>receive>entry
configure>system>security>keychain>direction>uni>send>entry
Description The shutdown command administratively disables the entity. When disabled, an entity does
not change, reset, or remove any configuration settings or statistics. Many entities must be
explicitly enabled using the no shutdown command. The operational state of the entity is
disabled as well as the operational state of any entities contained within. Many objects must
be shut down before they may be deleted.
The no form of the command puts an entity into the administratively enabled state.
Default no shutdown
Item Description
Syntax address-type {system | interface | loopback<ip-int-name>}
Context configure>system>security>source-address
(1 of 2)