"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Ethernet Connection Fault Management
Issue: 10 3HH-11982-AAAA-TQZZA 187
8.12.1.9 shutdown
Table 214 shutdown command
8.12.1.10 data-size
Table 215 data-size command
Parameters domain – Connectivity Fault Management domain
association- Maintenance Association for the Domain
mep - CFM Maintenance Endpoint
session - creates a session for the given mep
Item Description
(2 of 2)
Item Description
Syntax shutdown
Context configure>eth-cfm>y1731pm>domain
Description Indicates the desired administrative state of the y1731pm session.
The no form of the command will admin enable the y1731pm session.
Default Disabled
Item Description
Syntax data-size [data-size]
Context configure>eth-cfm>y1731pm>domain
Description Specifies the number of octets in the Value field of the Data TLV of the Ethernet CFM packet.
If zero is specified, the packet has no Data TLV.
This parameter is optional and is valid only if type is specified as two-way-slm.
The no form of the command reverts the value to the default.
Default 0
Parameters data-size — 0...1500