Nokia 7330 - Show Commands; 4.4 Security CLI Commands; General Security Commands; Description

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Security
Issue: 10 3HH-11982-AAAA-TQZZA 49
— no receive
— send option-number
— no send
4.3.4 Show Commands
show
— system
— security
— cpu-filter ip-filter [entry entryId
— cpu-filter ipv6-filter [entry entryId
— keychain keychain-name [detail]
4.4 Security CLI Commands
The following commands are described below:
• General Security Commands
• CPU-filter Commands
• Keychain Commands
• Show Commands
4.4.1 General Security Commands
4.4.1.1 description
Table 33 description command
Item Description
Syntax description description-string
no description
Context configure>system>security>cpu-filter>ip-filter>entry
configure>system>security>cpu-filter>ipv6-filter>entry
configure>sytems>security>keychain>direction>bi>entry
configure>system>security>keychain>direction>uni>receive>entry
configure>system>security>keychain>direction>uni>send>entry
Description This command creates a text description stored in the configuration file for a configuration
context.
This command associates a text string with a configuration context to help identify the context
in the configuration file.
The no form of the command removes the string.
(1 of 2)