Nokia 7330 - Action; Default-Action; Log Filter Entry Commands; Table 114 Default-Action Command

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Events and Logs
Issue: 10 3HH-11982-AAAA-TQZZA 125
6.8.3.2 default-action
Table 114 default-action command
6.8.4 Log Filter Entry Commands
6.8.4.1 action
Table 115 action command
Default No event filters are defined.
Parameters filter-id — The filter ID uniquely identifies the filter.
Values: 1 —1001
Item Description
(2 of 2)
Item Description
Syntax default-action {drop | forward}
no default-action
Context configure>log>filter filter-id
Description The default action specifies the action that is applied to events when no action is specified in
the event filter entries or when an event does not match the specified criteria.
When multiple default-action commands are entered, the last command overwrites the
previous command.
The no form of the command reverts the default action to the default value (forward).
Default default-action forward — The events which are not explicitly dropped by an event filter match
are forwarded.
Parameters drop — The events which are not explicitly forwarded by an event filter match are dropped.
forward — The events which are not explicitly dropped by an event filter match are forwarded.
Item Description
Syntax action {drop | forward}
no action
Context configure>log>filter filter-id>entry entry-id
(1 of 2)