Nokia 7330 - Linktrace; Table 222 Linktrace Command

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Ethernet Connection Fault Management
Issue: 10 3HH-11982-AAAA-TQZZA 191
8.12.2.2 linktrace
Table 222 linktrace command
Parameters mac-address -Destination MAC address. Format:xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx
mep-id - MEP ID
Values: 1..8191
md-index - MD index.
Values: 1..4294967295
ma-index - MA index.
Values: 1..4294967295
send-count - Number of loop back message to send
Values: 1..5
Default: 1
data-size - Size of the loop back message to send
Values: 0..1500
Default: 0 bytes
priority - Priority of the loop back message
Values: 0..7
Default: The CCM and LTM priority of the MEP
test-pattern-type - Type of test pattern
Values: prbswithcrc
Default: By default, the test pattern will not be included
Item Description
(2 of 2)
Item Description
Syntax linktrace mac-address mep mep-id domain md-index association
ma-index [ttl ttl-value
Context oam>eth-cfm
Description This command sends a linktrace message to another MIP/MEP
(1 of 2)