Nokia 7330 - Save Command; System Management CLI Command Reference

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
System Management
Issue: 10 3HH-11982-AAAA-TQZZA 27
The place where the configuration files are saved is fixed (public directory on Core0
CF).
The save command saves both the default configuration parameters and the
non-default configuration parameters.
The admin software-mngt ihub database oam-save-protected command saves the
protected configuration parameters.
3.3.2 Save Command
The save command saves the running configuration to a configuration file.
admin
save
Example:
admin# save
The admin software-mngt ihub database oam-save-protected command saves the
protected configuration to a min configuration file.
admin
software-mngt
ihub
database
oam-save-protected
Example:
admin software ihub database oam-save-protected
3.4 System Management CLI Command
Reference
This section lists the following commands:
• System Information Commands
• System Administration Commands
• Show Commands
• Clear Commands