Nokia 7705 SAR - Page 379

Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 379
On the 2-port 10GigE (Ethernet) Adapter card and 2-port 10GigE (Ethernet) module, SSM
frames received on the ring Ethernet ports are extracted for processing through the v-port.
Therefore, the v-port must be active (that is, in no shutdown mode) in order for SSM to
function. The v-port must also be active in order for the 2-port 10GigE (Ethernet) Adapter card
or 2-port 10GigE (Ethernet) module to transmit SSM frames. No additional interface or IP
configuration is required on the v-port for SSM.
Default shutdown
code-type
Syntax code-type {sonet | sdh}
Context config>port>ethernet>ssm
config>port>dsl>ssm
Description This command specifies whether to use SDH or SONET values for the encoding of
synchronous status messages on a:
• synchronous ring Ethernet port on the 2-port 10GigE (Ethernet) Adapter card
• synchronous ring Ethernet port on the 2-port 10GigE (Ethernet) module
• synchronous Ethernet port on the 6-port Ethernet 10Gbps Adapter card
• synchronous Ethernet port on the 8-port Ethernet Adapter card, version 2
• synchronous Ethernet port on the 8-port Gigabit Ethernet Adapter card
• synchronous Ethernet port on the 10-port 1GigE/1-port 10GigE X-Adapter card
• synchronous Ethernet port on the Packet Microwave Adapter card
• synchronous Ethernet port on the 4-port SAR-H Fast Ethernet module
• DSL module port on the 7705 SAR-M (variants with a module slot)
• synchronous Ethernet port on the 7705 SAR-A
• synchronous Ethernet port on the 7705 SAR-Ax
• synchronous Ethernet port on the 7705 SAR-H
• synchronous Ethernet port on the 7705 SAR-Hc
• synchronous Ethernet port on the 7705 SAR-M (all variants)
• synchronous Ethernet port on the 7705 SAR-W
• synchronous Ethernet port on the 7705 SAR-Wx (all variants)
• synchronous Ethernet port on the 7705 SAR-X
Default sdh
Parameters sonet — specifies the values used on a G.781 option 1 compliant network
sdh — specifies the values used on a G.782 option 1 compliant network