Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 657
Tx DUS/DNU Indicates whether the transmission of the QL-DUS/DNU
value in synchronization status messages is enabled or
disabled on the port
Rx J0 String (Hex) The hex value of the received J0
Cfg Alarm The type of alarms to be logged and reported for the SONET/
SDH port
Alarm Status The current alarm state
BER SD Threshold The configured threshold for line signal degradation BER
error rate, that when crossed determines the signal
degradation and signal failure
BER SF Threshold The configured threshold for line signal failure BER error
rate, that when crossed determines the signal degradation
and signal failure
Hold time up The hold-timer value for link-up event dampening
Hold time down The hold-timer value for link-down event dampening
The following information is provided for a configured SFP:
• model number
• TX laser wavelength
• whether it is diagnostics capable
• connector code
• vendor organizationally unique identifier (OUI)
• manufacture date
•media
• serial number
• part number
• optical compliance
• link length support:
• whether it is Sync-E capable
Sonet Section
ES-S The number of Errored Seconds errors
SES-S The number of Severely Errored Seconds errors
SEFS-S The number of Severely Errored Framing Seconds errors
CV-S The number of Code Violations errors
Table 66 Show Port Detail Output Fields (SONET/SDH Port) (Continued)
Label Description
To Next Page
Loading...
