7705 SAR Interfaces
706
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
Dot1Q Ethertype The protocol carried in a dot1q Ethernet frame
QinQ Ethertype The protocol carried in a QinQ Ethernet frame
Ing. Pool % Rate The amount of ingress buffer space, expressed as a
percentage of the available buffer space, that will be
allocated to the port for ingress buffering
Egr. Pool % Rate The amount of egress buffer space, expressed as a
percentage of the available buffer space, that will be
allocated to the port for egress buffering
Net. Egr. Queue Pol. The number of the associated network egress queue
QoS policy, or default if the default policy is used
Auto-negotiate true: the link attempts to automatically negotiate the link
speed and duplex parameters
false: the duplex and speed values are used for the link
Net. Scheduler Mode The mode for servicing CoS queues; 16-priority
scheduling is the only supported value
MDI/MDX Ethernet type
Config Phy-tx-clock The mode used to establish timing control of a
1000Base-T port. The options are:
• N/A— the port does not support 1000Base-T
• auto-pref-master—prefers to be master during
autonegotiation
• auto-pref-slave—prefers to be slave during
autonegotiation
• slave—the port is forced to be slave
• master—the port is forced to be master
Oper Phy-tx-clock The operational value of the master-slave relationship of
the 1000Base-T physical layer transmit clock. The
options are:
• N/A— the port or the inserted SFP does not support
1000Base-T, the port is down, or negotiation failed
• slave—the port is slave
• master—the port is master
Allow Eth-BN Indicates whether Ethernet Bandwidth Notification (ETH-
BN) is allowed on the port: True or False
Table 72 Show Port Detail Output Fields (v-port) (Continued)
Label Description
To Next Page
Loading...
