Nokia 7705 SAR - Page 802

7705 SAR Interfaces
802
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
LACP Enabled: LACP is enabled
Disabled: LACP is disabled
Mode Active: LACP operates in active mode
Passive: LACP operates in passive mode
Role Actor: local device (7705 SAR) participating in LACP
negotiation
Partner: remote device participating in LACP negotiation
LACP Transmit Intvl LACP timeout signaled to peer
LACP xmit stdby LACP transmit on standby links enabled or disabled
Selection Criteria Configured subgroup selection criteria
Slave-to-partner Slave-to-partner flag enabled or disabled
Number of sub-groups Total subgroups in LAG
Forced n/a
System Id System ID used by actor in LACP messages
System Priority System priority used by actor in LACP messages
Admin Key Configured LAG key
Oper Key Key used by actor in LACP messages
Prtr System Id System ID used by partner in LACP messages
Prtr System Priority System priority used by partner in LACP messages
Prtr Oper Key Key used by partner in LACP messages
MC Peer Address IP address of the MC-LAG peer
MC Peer Lag-id The LAG identifier of the MC-LAG peer
MC System Id System ID used by the MC-LAG actor in LACP messages
MC System Priority System priority used by the MC-LAG actor in LACP
messages
MC Admin Key Configured MC-LAG key
MC Active/Standby Indicates whether the port is in active or standby mode
Table 102 Show LAG Detailed Output Fields (Continued)
Label Description