7705 SAR Interfaces
832
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
1/8/10.10 Down No Down accs cem mddb slave
1/8/11 Down No Down
1/8/11.11 Down No Down accs cem mddb slave
1/8/11.22 Down No Down accs cem mddb slave
1/8/12 Down No Down
1/8/13 Down No Down
1/8/14 Down No Down
1/8/14.14 Down No Down accs cem mddb slave
1/8/15 Down No Down
1/8/16 Down No Down
1/8/16.32 Down No Down accs cem mddb slave
======================================================
Table 118 Show SCADA Bridge Detail Output Fields
Label Description
Scada Bridges on Slot 1
Bridge Id The bridge/branch ID (the bridge ID is in the format
slot/mda/bridge-id, where bridge-id is 1 to 16; the branch
ID is in the format slot/mda/bridge-id.branch-id, where
branch-id is 1 to 32)
Admin State The administrative state of the bridge, either Up or Down
Link Indicates whether there is an active link on the bridge,
either Yes or No
Bridge State The operational state of the bridge, either Up or Down
Port Mode The operational mode of the bridge (always accs –
access)
Port Encp The encapsulation type of the bridge (always cem –
circuit emulation)
Bridge Type The bridge type: mddb, pcm, or vcb
Branch Type The type of device connected to the bridge, either master
or slave (for MDDB and PCM applications) or N/A (for the
VCB application)
To Next Page
Loading...
