Nokia 7705 SAR - Page 831

Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 831
3.14.2.1.11 Show SCADA Commands
scada
Syntax scada [bridge_id] [detail]
scada [bridge_id] description
scada [bridge_id] [detail] statistics
Context show
Description This command displays SCADA bridge information.
Parameters detail — displays detailed information
bridge-id — specifies the bridge ID, in the format slot/mda/bridge-id, where bridge-id is 1
to 16
description — displays the descriptions that have been configured for each bridge
statistics — displays statistics information pertaining to bridges and branches
Output The following outputs are examples of SCADA information:
• SCADA bridge detail (Output Example, Table 118)
• specific SCADA bridge detail (Output Example, Table 119)
Output Example
A:ALU-1># show scada detail
======================================================
Scada Bridges on Slot 1
======================================================
Bridge Admin Link Bridge Port Port Bridge Branch
Id State State Mode Encp Type Type
------------------------------------------------------
1/8/1 Up Yes Up accs cem mddb master
1/8/1.1 Up Yes Up accs cem mddb master
1/8/1.2 Up Yes Up accs cem mddb slave
1/8/1.3 Up Yes Up accs cem mddb slave
1/8/1.4 Up Yes Up accs cem mddb slave
1/8/1.5 Up Yes Up accs cem mddb slave
1/8/2 Down No Down
1/8/3 Down No Down
1/8/4 Down No Down
1/8/5 Down No Down
1/8/6 Down No Down
1/8/6.5 Down No Down accs cem mddb slave
1/8/7 Down No Down
1/8/8 Down No Down
1/8/8.4 Down No Down accs cem mddb slave
1/8/8.5 Down No Down accs cem mddb slave
1/8/8.6 Down No Down accs cem mddb slave
1/8/9 Down No Down
1/8/10 Down No Down