Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 2-121 P/N 196515 (Revision A)
Lesson 2-14
Part Heaters
A. Introduction
Some X-1000 Dispensing Systems are equipped with underboard substrate
heating systems. There are two types of heaters currently available on the X-
1000 systems: contact heaters and impingement heaters. Both types of heaters
are capable of independent temperature regulation in pre-heat, dispense heat
and post-heat zones.
B. Enabling Objective
2.14 Understand the heater theory of operation, demonstrate how to
electrically and temperature test heater tooling, and calibrate part heaters.
C. Topic Outline
1. Introduction
2. Overview
 Theory of Operation
 Contact Heaters
 Impingement Heaters
 Heater Calibration
3. Summary and Review
To Next Page
Loading...
Need help?
General