Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 3-19 P/N 196515 (Revision A)
Lesson 3-4
Draining the Water Trap
A. Introduction
Because the facility air supply may contain moisture that can damage the
dispensing system, the X-1000 is equipped with a water trap that condenses
this moisture. The water trap condenses this moisture before it enters the
dispenser pneumatic system. The operator or technician must drain the water
trap weekly or whenever it is full
B. Enabling Objective
3.4 Demonstrate how to drain the water trap.
C. Topic Outline
1. Introduction
2. Overview
 Draining the Water Trap
3. Summary and Review
To Next Page
Loading...
Need help?
General