Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 4-97 P/N 196515 (Revision A)
Lesson 4-8
Troubleshooting the Conveyor
A. Introduction
Occasionally you may experience conveyor problems. Conveyor failure can have
numerous symptoms as well as causes, and it will be necessary to isolate these
factors in order to effectively troubleshoot conveyor problems.
B. Enabling Objectives
4.8 Perform necessary procedures to isolate conveyor failure.
C. Topic Outline
1. Introduction
2. Overview
 Conveyor Fault Isolation Procedure
- Board Sensor Fault Isolation
- Conveyor Motor Fault Isolation
- Heater Fault Isolation
- SMEMA Fault Isolation
 Conveyor Troubleshooting Summary
 Troubleshooting Guidelines
3. Summary and Review
To Next Page
Loading...
Need help?
General