Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 3-23 P/N 196515 (Revision A)
Lesson 3-5
Lubricating the X-Beam and Y-Rail Linear Bearings
A. Introduction
The X, Y, and Z-axes support the dispense head and allow it to travel within the
dispensing area. The dispense head is the portion of the machine that moves
during dispensing operation. Lubricating the X-beam and Y-rail linear bearings on
a monthly basis will ensure smooth dispensing head movement and prolong the
life of the bearing housing.
B. Enabling Objective
3.5 Perform necessary steps to lubricate the X-beam and Y-rail linear
bearings.
C. Topic Outline
1. Introduction
2. Overview
 Lubricating the X-Beam and Y-Rail Linear Bearings
3. Summary and Review
To Next Page
Loading...
Need help?
General