Numatics G3 Series - Page 54

G3 Series EtherNet/IP
TM
DLR Technical Manual
6-54
TDG3EDM1-6EN 3/18
Subject to change without notice
www.asco.com/g3
Terminator Module
• Used to terminate SUB-BUS connections.
• Must be installed on the left side of the last Sub-Bus module.
Description
Part Number
Terminator Module with Din Rail Mounting
240-245
Terminator Module without Din Rail Mounting
240-184
• The terminator must be installed in the G3 system for proper operation.
NOTE!