683311W
1-2
1.2 MACHINE OVERALL CHARACTERISTICS
1.2.1PRINTER CHARACTERISTICS
PRINT MODULE 24-needle impact print head
Printing capabilities: 1original + 4 copies
Savings book handling capabilities
PRINT SPEED 76 cps @ 1/10" in LQ mode
115 cps @ 1/10" in NLQ mode
230 cps @ 1/10" in DRAFT mode
310 cps @ 1/10" in HSD mode
460 cps @ 1/15" in VHSD mode
PRINT MODE V.H.S.D., H.S.D., DRAFT, N.L.Q., L.Q.
RIBBON CARTRIDGE Indelible fabric lasting approximately 2.5 M chars.
PAPER FEED Front feeder with automatic document alignment facility.
If vertical magnetic device is present, the passbook alignment must be done
manually. The machine will create an error signal.
DOCUMENT SIZE 245 x 450 mm max.
70 x 70 mm min.
See section 1.4 for more details
CONSOLE Located on the printer case, it has three keys and five LEDs
EMULATIONS Native PR 2, IBM Proprinter II
INTERFACE According with models: Serial RS 232C, Serial RS 232C and
parallel Centronic, double Serial RS 232C
DIMENSIONS Width 384 mm; Depth 280 mm; Height 203 mm rounded cover, 195 mm flat
cover; Weight 10.5 Kg.
POWER ABSORPTION Stand-by:< 15 W
In operation: 170 W max. (worst case)
POWER SUPPLY 115 V (+ 10%)
220 to 240 V (+ 10%)
(depending on the country of destination)
To Next Page
Loading...
Need help?
General