683311W
4-20
4.4.2 CONFIGURATION PARAMETERS
4.4.2.1 CONFIGURATION MODE MENU PARAMETERS
Determines the Draft type that can be selected via SW
or by default.
Determines the LQ type that can be activated via SW
or by default.
Activates/deactivates the acoustic signal.
Interface to connect to the system.
Data transmission/reception rate.
Data format: 7 or 8 bits.
Presence/type of parity control: none, odd, even.
Number of stop bits.
When enabled (Y), every paper movement is
performed with the print head outside the size of the
inserted paper. In this way it is possible to use forms
with the minimum paper specifications, avoiding any
possible paper bourage.
Saves (Y) or not (N) the selected arrangement in this
set-up section.
DRAFT SPEED NORMAL - HIGH -
VERY HIGH
LQ TIPE NLQ1 - NLQ2 - LQ2
BUZZER Y - N
INTERFACE: RS 232
BAUD RATE: 9600 - 4800
2400 - 1200
BIT/CHAR: 7 - 8
PARITY: NONE - ODD -
EVEN
STOP BIT: 1 - 2
SPECIAL FORMS: N - Y
SAVE PARAMETERS:Y - N
To Next Page
Loading...
