Olivetti PR2 - Mechanical Adjustments and Procedures

Service Manual
683311W
8-1
8. MECHANICAL ADJUSTMENTS
The mechanical adjustments, for easier consultation, have been divided into:
- 8.1.X Adjustments on the basic machine, with no options
- 8.2.X Adjustments on the basic machine options (Horizontal magnetic/MICR device,
Vertical Magnetic Device), scanner option.
Each individual adjustment is divided into:
- Machine arrangement. Describes the arrangement of the pritner in order to carry out the
adjustment.
- Conditions to be checked. Indicates the points, values and tolerances to be observed to ensure
good linkage operation.
- Operating procedure. Lists the operations to be carried out to make the adjustment.
- Notes. Any references to adjustment sequences or tests to be carried out to check the adjustment.