EasyManuals Logo

Olivetti PR2 User Manual

Olivetti PR2
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
683311W
4-2
4.2 PRINT TEST
With the print test the operator can obtain a printout of the machine set-up.
The instructions to run the test are given in section 3.3 (off line tests).
4.3 STANDARD MACHINE SET-UP
The set-up environment is only to be accessed by the service engineer since many of the
selectionable parameters serve to personalize the machine or installed option and must not be
changed. An incorrect intervention by the operator could cause faults on the printer.
4.3.1 SET-UP ACTIVATION
To enter the set-up environment, power off the machine and power on again keeping the ST1 and ST2
keys on the console pressed down.
After the reset has been run, insert an A4 size page into the front infeed: the machine will print a line
with the meanings of all the keys in this environment.
On the following pages there is a flow-chart that indicates the possibilities to enter into the various parts
that form the set-up.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Olivetti PR2 and is the answer not in the manual?

Olivetti PR2 Specifications

General IconGeneral
BrandOlivetti
ModelPR2
CategoryPrinter
LanguageEnglish

Related product manuals