Olivetti PR2 - Power-On Faults and Possible Causes

683311W
5-4
5.3 POWER ON FAULTS
The printer does not power on The autodiag. indicate a main board failure The autodiag. indicate a mechanical failure The printer is unable to connect with the system
Incorrect/missing line voltage
Damaged power cord
Power cord partly inserted
Blown fuse
Faulty power supply board
Faulty transformer
Faulty main board
Faulty front photosensors
Faulty carriage photosensor
Printer cover open
Jammed paper
Interface connection problems
Interface line problems
Incorrect setup
FAULT
POSSIBLE CAUSE
X
X
X
X
X
X
XX
X
X
X
X
X
X
X