Service Manual
683311W
4-25
4.5.2.2 SIEMENS NIXDORF MENU PARAMETERS
PASSBOOK OFF - ON
CHAR SET PC - ISO
USA
FRANCE
GERMANY
ENGLAND
DENMARK
SWEDEN
ITALY
SPAIN
JAPAN
NORWAY
DENMARK II
SPAIN II
LATIN AMERICA
CR HANDLING: CR - CR+LF
TOF TENTHS: 1-2-3-4-5-6-7-8
TOF UNITS: 0-1-2-3-4-5-6-7-8-9
EDGE HANDLING: LEFT - RIGHT
DRAFT SPEED: NORMAL - HIGH -
VERY HIGH
LQ TIPE: NLQ1 - NLQ2 - LQ1 -
LQ2
CHAR DEFINITION: LQ - DRAFT
HOR. FOLD (xx/6"): OFF-35-36-37-38-
39-40-41-42-43-44-
45-46-47-48-49
BUZZER: ON - OFF
Indicates whether the printer is enabled (Y) or not (N)
by default to process passbooks.
Selects or not the automatic execution of a line feed
each time a carriage return command is received.
Selects the tenths of the TOF value in n/60".
Selects the units of the TOF value in n/60".
Selecting RIGHT enables SNI 4904 (ND 90)
compatibility with manual and/or SW-controlled right-
hand alignment. Selecting LEFT enables SNI 4904
(ND90) compatibility with manual and/or SW-controlled
left-hand alignment.
Determines the Draft type that can be selected via
SW and by default.
Determines the LQ type that can be activated via SW
and by default.
Selection of print definition.
This parameter enables the management of
passbooks with horizontal stitching. Passbooks with
vertical stitching can be used after selecting OFF;
when selecting one of the values indicated, the value
itself indicates the length of the passbook in n/6". In
this case with each vertical movement the printer will
automatically force the printhead out when it goes
near to the stitching.
Activates/deactivates the acoustic signal.
To Next Page
Loading...
Need help?
General