Omron C200H-MC221 - Page 289

Appendix DMC Parameter Settings
269
Programmer: Program Number: Date: Page:
Feedrate Parameters
Parameter
Setting
Setting Range
X axis Y axis
gg
Max. high-speed feed rate
1 to 39,999,999
Max. interpolation feed rate
,,
Origin search high speed
Origin search low speed
Max. jog feed rate
Accel./Decel. curve Trapezoidal or
S-shaped
Acceleration time
0 to 9,999 ms
Deceleration time
,
Interpolation accel. time
Interpolation decel. time
MPG ratio 1
1 to 1,000
MPG ratio 2
,
MPG ratio 3
MPG ratio 4
Zone Parameters
Parameter Setting
Zone 1 specification
Zone 1
Negative SV
Positive SV
Zone 2 specification
Zone 2
Negative SV
Positive SV
Zone 3 specification
Zone 3
Negative SV
Positive SV
Zone 4 specification
Zone 4
Negative SV
Positive SV
Zone 5 specification
Zone 5
Negative SV
Positive SV
Zone 6 specification
Zone 6
Negative SV
Positive SV
Zone 7 specification
Zone 7
Negative SV
Positive SV
Zone 8 specification
Zone 8
Negative SV
Positive SV