Setting the Retry Function
92
FQ-CR2 User’s Manual
Setting normal retry
• Set the retry mode to [Normal retry] in "Retry details".
(Setup Mode) − [Sensor settings] − [Retry details]
• Specify the maximum count and interval.
[Inspect] − [Retry details]
Setting exposure retry
• Set the retry mode to [Exposure retry] in "Retry details".
(Setup Mode) − [Sensor settings] − [Retry details]
• Set the brightness (shutter speed) step, increment count, and decrement count.
[Inspect] − [Retry details]
1 Press [Normal retry] for the retry mode.
2
Press OK.
1 Set the maximum count and interval.
Parameter Settings Description
Max count 0 to 20, (default: 4) Sets the maximum number of retries.
Interval 32 to 999, (default: 100) Sets the capture interval (msec).
1 Press [Exposure retry] for the retry mode.
1 Set the shutter speed step, increment count, and
decrement count.
FQ Sensor User Manual.book 92 ページ ２０１１年７月８日 金曜日 午後２時３０分
To Next Page
Loading...
