6-3
Checking Result Output
Normally, output to an external device is performed when the monitor window is open, but it is not per-
formed while scene data is being edited in the following editing screens.
• Scene maintenance window
• Scene data editing screen
• Processing unit editing screen
• Editing screen of each tool
If you wish to output the measurement results in those screens, select the following check box in the
adjustment screen.
• Test measurement settings - Output
6 Online Debugging
6 - 7
FH/FHV Series Vision System Operation Manual for Sysmac Studio (Z343-E1)
6-3 Checking Result Output
6
To Next Page
Loading...
