Omron SYSMAC FH Series Operation Manual

Sensor
Line
Project data
Line
Line
Scene group data
Scene group data
Command
customize
data
System
data
Tool data
Scene data
Scene group data
Scene data
Scene data
1-2-2
Project Data Handling in Different System Configurations
The contents of the Sysmac Studio project data and the data being synchronized varies depending on
the connection method (i.e., Ethernet direct connection or connection through an NJ/NX/NY
-series
Controller) between the FH/FHV sensor and the computer that runs Sysmac Studio. Particularly with
the connection through an NJ/NX/NY-series Controller, there are restrictions on some Sysmac Studio
functions. Be sure you understand the following before operation.
For details, refer to the 2-8 Precautions on Synchronization through an NJ/NX/NY-series Controller on
page 2 - 44.
1 Overview
1 - 4
FH/FHV Series Vision System Operation Manual for Sysmac Studio (Z343-E1)

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English