Omron SYSMAC FH Series

4 A new project is created.
The project file is created and the next screen appears.
Precautions for Correct Use
• An online connection cannot be established if the FH/FHV device registered to the project
and the actual device are not the same type and version.
•
If there is already a different FH/FHV slave device in the project with an established online
connection, you will not be able to establish an online connection for a new FH/FHV slave
device. To establish an online connection for a new FH/FHV slave device, switch the other
FH/FHV slave device from online to offline.
2-3-2
Adding FH/FHV Device to a Project
You can add an FH/FHV device to a project.
Right-click the Device Group and select Add - FH or Add - FHV.
2 Basic Operations
2 - 8
FH/FHV Series Vision System Operation Manual for Sysmac Studio (Z343-E1)