Omron SYSMAC FH Series

To Next Page

To Previous Page

Introduction

Thank you for purchasing the FH/FHV Series.

This manual contains information that is necessary to use the FH/FHV Series.

Please read this manual and make sure you understand the functionality and performance of the

FH/FHV Series before you attempt to use it in a control system.

Keep this manual in a safe place where it will be available for reference during operation.

Intended Audience

This manual is intended for the following personnel, who must also have knowledge of electrical sys-

tems (an electrical engineer or the equivalent).

• Personnel in charge of introducing FA systems.

• Personnel in charge of designing FA systems.

• Personnel in charge of installing and maintaining FA systems.

• Personnel in charge of managing FA systems and facilities.

Applicable Products

This manual covers the following products.

• FH-1£££

• FH-1£££-££

• FH-2£££

• FH-2£££-££

• FH-3£££

• FH-3£££-££

• FH-5£££

• FH-5£££-££

• FH-L£££

• FH-L£££-££

• FHV7£-£££££-C

• FHV7£-£££££-S££/FHV7£-£££££-S££-££

• FHV7£-£££££-H££/FHV7£-£££££-H££-££

Part of the specifications and restrictions are given in other manuals. Refer to Relevant Manuals on

Relevant Manuals on page 2 and Related Manuals on page 18.

Introduction

FH/FHV Series Vision System Operation Manual for Sysmac Studio (Z343-E1)

Other manuals for Omron SYSMAC FH Series