3-5
Ending a Connection with a Vision
Sensor
End the connection with a sensor currently connected with an online connection and switch to the off-
line state.
Additional Information
You can also check and edit settings data while the sensor is offline.
3-5-1
Ending a Connection in the Sensor Connection Screen
Open the sensor connection screen and then click the Disconnect button of Online - Sensor
connection.
3-5-2
Ending a Connection in the Multiview Explorer
Right-click the type name in the Multiview Explorer and select Offline from the menu.
3 Connecting with a Vision Sensor
3 - 10
FH/FHV Series Vision System Operation Manual for Sysmac Studio (Z343-E1)
To Next Page
Loading...
