4-6 Workstation 5A Setup Guide - Fourth Edition
Installing and Operating the Workstation 5A
The IO Panel
+5V/+12V/+24V Select - USB 6
This is the powered USB connector. Like the other USB ports on the IO Panel,
USB6 port data can be disabled through the BIOS or the Diagnostics Utility.
The IO Panel connector supports three voltages, +5V, +12V and +24V along
with USB6, a standard USB 2.0 compatible port. The Protege Customer
Display System is supplied with a custom cable that delivers +12V and USB6
data.
Figure 4-2, below shows an example of a new cover for USB6 connector. Its
purpose is to help prevent connecting a Remote Display into the USB6
connector.
Figure 4-2: USB6 Connector Cover
VGA
WIN32 operating systems include support for dual independent display,
allowing the desktop to be extended across two monitors. For workstations
running Windows Embedded CE 6.0, the VGA output displays the same image
that appears on the LCD, the extended desktop feature is not supported.
/ OPT
This RJ45 knock out is reserved for the Mini-PCI Modem or future optional
Mini-PCI Card.
COM 1
This industry standard DB9 male connector can be used for serial printer or
other peripheral. The port is backed by an 16550A UAR
T with a 16-byte
receive buffer.
COM2
COM2 is a full featured modular RS232 Interface. This port is similar in
function to the modular COM 5 port on the Workstation 5 and PCWS 2010.
Use RJ45 to RS232 DB9 Adapter Cable, P/N 300319-103.
To Next Page
Loading...
Need help?
General
