Workstation 5A Setup Guide - Fourth Edition 3-29
What’s Inside?
Installing Options
USB Wireless Module
The optional USB Wireless Module is based on a Sagrad WiFi module with
USB Interface. The Sagrad Wireless Module mounts to a bracket located
between the power supply and IO panel.
This wireless kit can be used in both the Workstation 5 and Workstation 5A.
Refer to MD0019-004 for installation instructions.
Mini-PCI Options
Two options are available for the WS5A Mini-PCI connector.
Abocom Mini-PCI Wireless Card
The Abocom WiFi card used on the original Workstation 5 can also be used the
Workstation 5A. The kit has been modified by adding a new adhesive-backed
antenna.
Refer to MD0013-005C for installation instructions.
SparkLAN Mini-PCI Wireless Card
The Workstation 5A will be moving to a new 802.11 a/b/g/n Mini-PCI
Wireless Card from SparkLAN. The card features advanced WEP encryption,
WPA, WPA2, and 802.1x for security, and drivers are available for all
supported operating systems. Wifi antenna type and placement are currently
being evaluated.
Mini-PCI Modem II
The Mini-PCI Modem can only be used with WIN32 operating systems such
as POSReady 2009. The modem is not compatible with Windows Embedded
CE 6.0.
Refer to MD0019-001 for installation instructions.
To Next Page
Loading...
Need help?
General
