Workstation 5A Setup Guide - Fourth Edition 1-7
What is the WS5A?
The System
• +24V/0.4A (9.6W) - not capable of supporting the TM-T88 printer.
Support for the TMT-88V is planned for the Revision F or later System
Board.
Intelligent MICROS peripherals such as the Protégé Customer Display System
are equipped with a custom interface cable that attaches directly to the USB6
IO Panel connector, bypassing the traditional Powered USB cables and
connectors.
Finger Print Reader
An optional finger print reader can be mounted on the left or right of the top
cover
.
Figure 1-4: Optional Finger Print Reader
To Next Page
Loading...
