3-28 Workstation 5A Setup Guide - Fourth Edition
What’s Inside?
Installing Options
DMA Enabled CF Riser Card
The Figure below show the DMA Enabled CF card installed in the Workstation
5A. Direct Memory Access (DMA) is a method of moving large amounts of
data from an IDE device such as the CF card to main memory with minimal
CPU intervention.
Figure 3-22: DMA Enabled CF Riser Card
Approved DMA Enabled CF Cards
Approved DMA Enabled CF Cards are shown in the Table below.
Figure 3-23: Approved CF Cards
Size MICROS P/N Description
4G 700504-111 Unigen
UGB30STC4000Y3 MSE
4G 700504-111 Wintec
W7CF004G1DAI-H31PB-2Q2.07
4G 700504-111 Transcend
TS4GCF200I (WO 432964)
4G 700504-111 Wintec
W7CF004G1DAI-H41PD-04D.A5
256MB 700504-119 Wintec
W7CF256M1DA I -H31PC-002.06
256MB 700504-119 Wintec
W7CF256M1DAI-H31PD-002.C8
256MB 700504-119 Unigen
UGB30STC0256Y5-MSE